Affiliate disclosure: some links are affiliate links — as an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Full disclosure.
A Dyna-Glo listing often shows the model number more prominently than the marketing name. Once you know the pattern, it tells you the fuel type, the category, and the BTU rating at a glance.
Top 3 Recommended
Model Number Lookup
| Model Number | BTU | Category | What the Code Means |
|---|---|---|---|
| Grab N Go | 10,000 BTU | Portable radiant | No RMC/LPFA prefix — simple BTU-based name |
| LPFA40WH | 40,000 BTU | Forced air (Workhorse) | LP = liquid propane, FA = forced air, 40 = BTU tier, WH = Workhorse |
| LPFA60WH | 30,000–60,000 BTU | Forced air (Workhorse) | Same pattern; 60 marks the top of its adjustable range |
| RMC-FA150DGD | 120,000–150,000 BTU | Forced air (RMC line) | RMC = the flagship forced-air series, FA = forced air, 150 = top BTU, DGD = Dyna-Glo Design |
Why This Matters When Shopping
Two listings with similar photos can be very different heaters. Reading the model number first, before the marketing copy, tells you the real BTU tier and category in seconds. This matters most when comparing listings from different sellers, where product titles are sometimes copied inconsistently.
Breaking Down "RMC-FA150DGD"
RMC marks Dyna-Glo’s flagship forced-air series. FA stands for forced air. 150 is the top of its adjustable BTU range: 120,000 to 150,000. DGD is a Dyna-Glo design code, used across several models in the line. Once you can read one RMC model number, the rest of the series follows the same logic.
Breaking Down "LPFA40WH" and "LPFA60WH"
LP stands for liquid propane. This distinguishes these from any natural-gas variant Dyna-Glo sells under a similar naming pattern. FA again means forced air. The number, 40 or 60, is the BTU tier in thousands. WH marks these as part of the Workhorse sub-line. That is Dyna-Glo’s mid-range forced-air family, sitting below the flagship RMC series.
Why the Grab N Go Has No Prefix Code
The Grab N Go is Dyna-Glo’s portable radiant heater. It uses a plain, marketing-friendly name rather than a coded model number. This is common across the indoor-safe portable heater category generally. These models sell more on a simple BTU figure than on a technical designation aimed at contractors comparing forced-air specs.
Finding the Model Number on Your Own Heater
Check the rating plate. It is usually a metal or foil sticker near the fuel inlet or control panel. It shows the full model number stamped by the manufacturer. This is the number to reference when ordering a replacement part or contacting support. The marketing name alone is not always specific enough to identify the exact revision of a model.
Using Model Numbers to Find Genuine Parts
Search by the exact model number, not "Dyna-Glo heater part." This returns far more accurate results when shopping for a thermocouple, hose, or pilot assembly. Our parts and accessories guide lists specific genuine products for the current lineup.
Older and Discontinued Dyna-Glo Models
Dyna-Glo has sold other forced-air and portable models in past years. These may still show up in secondhand listings or older manuals. If you own an older unit not listed above, the same reading pattern generally applies. Look for FA or LP segments for forced air, and a plain name for portable radiant models. Checking the rating plate directly is still the most reliable way to confirm an older model’s exact specs.
A Quick Self-Test
Try reading "LPFA60WH" on your own before checking the answer. LP means liquid propane. FA means forced air. 60 means a top output of 60,000 BTU. WH means Workhorse. Put together, it is a liquid-propane, forced-air, 60,000 BTU Workhorse-line heater. That is the whole pattern in one example.
Comparing Model Numbers Across Brands
Other manufacturers use their own coding conventions, so a Dyna-Glo model number pattern will not translate directly to a Mr. Heater or Dewalt listing. Our Dyna-Glo vs. Mr. Heater comparison lines up equivalent models across both brands if you are cross-shopping.
Why Model Numbers Sometimes Get Buried in Listings
Third-party sellers on marketplaces sometimes lead a listing title with generic descriptive words rather than the model number, especially when a listing is aggregated across multiple similar products. Scroll to the technical specifications or product details section if the title alone does not show a clear model number, since it is almost always present somewhere on the listing page even when buried below the fold.
Reading a Rating Plate Correctly
A rating plate typically lists more than just the model number. It also shows the BTU rating, the fuel type, and sometimes a manufacture date code. When calling for support or ordering a part, have the full plate information ready rather than just the model number alone, since a support representative may ask for the manufacture date to confirm which parts revision applies to your specific unit.
What to Do If You Cannot Find the Rating Plate
On a portable radiant heater like the Grab N Go, check the base or the rear housing near the control valve. On a forced-air cart-style unit, check the frame near the fuel inlet or control panel. If the plate has worn illegible from job-site use, the original purchase receipt or the retailer’s order history is a reliable fallback for confirming the exact model purchased.
Model Numbers and Manual Downloads
Having the exact model number on hand makes finding the correct owner’s manual online far faster than searching by the general product name alone, since Dyna-Glo’s manual library is organized by model number. This matters most when troubleshooting a specific symptom, since manuals differ in their exact ignition sequence and safety guidance between the portable and forced-air lines.
Cross-Referencing With Retailer Listings
When comparing prices across multiple retailers for what appears to be the same heater, confirm the model number matches exactly before assuming two listings describe the identical product. Retailers occasionally list a close variant or a bundle under a similar name, and the model number is the most reliable way to confirm you are comparing like for like.
Regional and Version Variants
A model number sometimes carries a small suffix indicating a regional or minor design variant, most often not affecting core specs like BTU output. If you see two listings for what looks like the same model with a slightly different final letter or digit, check the retailer’s specifications rather than assuming a meaningful difference, since this variation is more often a packaging or minor hardware revision than a performance change.
Why Dyna-Glo Uses Multiple Sub-Lines Instead of One Naming System
The split between the Workhorse and RMC naming conventions reflects two different product development lines within the company rather than a single unified numbering system. This is common across manufacturers that have grown through both in-house development and acquisition of existing product lines over time. Knowing this history is not necessary to shop the current lineup, but it explains why the naming does not follow one perfectly consistent logic end to end.
Comparing a Model Number to the Product Title
A retailer’s product title often leads with a friendlier description, "Portable Propane Heater for Job Sites," rather than the model number itself. The model number typically appears afterward in the title or within the bullet specifications. Reading past the marketing-friendly opening phrase to find the actual model number is worth doing before assuming two similarly titled listings are the same product.
Quick Reference
See "RMC" and think flagship forced air. See "LPFA" and think Workhorse-tier forced air, with the following number as the BTU rating in thousands. See a plain descriptive name with no prefix and think portable radiant. This reading pattern covers nearly every current Dyna-Glo propane heater listing, and it takes only a minute to memorize once you have seen a few real examples side by side.